|
- Process monitoring and control
- Electric utilities
- Power Distribution
- Material handling
- Gas & Oil
|
- EPROM resident
- Data transfer rates up to 38.4 kbps
- Single and dual port versions.
|
- Use multiple protocols from one PLC.
- Standard ladder logic COMMREQ's
- Easy installation on standard GE Fanuc PCM modules.
|
|
- GE Series 90-30 (PCM 300, 301, 311)
- GE Series 90-70 (PCM 711)
|
|
CPI's protocol driver family for the GE FANUC line of PLC's is a series of compiled,
ROM based programs designed for operation on the GE FANUC 90-30 or 90-70 series
Programmable Coprocessor Modules (PCM's).
This family of products allow a GE Series 90 PLC to provide economical and secure control
and monitoring of intelligent field devices. Communication is established through a standard
serial interface. Drivers are available in one or two port versions, allowing communications
with more field devices from a single PCM module.
CPI's protocol drivers support RS-232 point-to-point connections and RS-485/422 multi-drop
connections. Our drivers use standard LogicMaster COMMREQ commands to issue commands
in the selected protocol. Data returned in response to the issued command is returned
into user specified PLC memory locations.
CPI's DNP slave driver is easily configured through COMMREQ commands and then waits for and
responds to DNP commands recieved on the PCM's serial port. This product allows DNP access
to PLC memory registers.
Implementing multiple drivers on a single PLC allows the PLC to function
as Modbus or DNP accessible data accumulators or in stand alone PLC monitor and control
applications.
CPI's drivers are easy to install and configure. Sample ladder logic programs are provided with
each driver to help you get up and running in a hurry.
|
|
|
|
